The 2004 Depoe Bay Wooden Boat Festival Article
by Terry Lesh
Photos by John Kohnen
and Terry Lesh
Depoe Bay, Oregon
is a miniature marine paradise just a few minutes north
of Newport, Oregon, on the Oregon Coast. Beginning in
the 1990s, Jack and Maggie brown, the local merchants
and the Killer Whales Rowing Club have organized this
intimate show at the seawall there. Messabouters (Western
Oregon Messabouts @ https://www.coots.org/)
and other boat fans come from Oregon, Washington, California,
Idaho and british Columbia to enjoy the camaraderie, share
boats and stories, and of course the seafood.
Depoe Bay is said
to be the “World’s Smallest Harbor.” Also called “The
Hole in the Wall,” it is one of nature's most unusual
and beautiful seaside places. The Pacific Ocean butts
up against the steep landfall but there is a little hole
in the rocks giving access to the tiny harbor. It’s a
tricky place to get in and out of by boat, requiring specific
local knowledge. Having commercial fished out there, I
can attest to that!
Some of the boats in the harbor,
entrance is under the arched bridge. {Lesh}
Another harbor view. {Lesh}
Some charter fishing boats. {Lesh}
Demonstrations during
the show included:
- Steam bending demonstrations by
Richard Cleveland (Sky Lakes Canoe & Paddle Co.)
- Canoe seat and paddle construction
(Sky Lakes)
- Wood strip pulling boat construction
(Susan Van Leuven)
- Wherry rowing shell construction
(Bob Jensen)
- Eskimo Kayak rolling (Harvey Golden)
Activities included
a challenge rowing race in a dory, model boat demonstrations,
kids wooden model building, crab races, a ducky prize
derby, Coast Guard videos, and various other talks, videos
and marine related goings on including a crab feed, and
a nice wine and hors d'oeuvres reception for the participants
Saturday evening at Gracie's Sea Hag Inn just behind the
display area.
The sound of Bagpipes
just after dawn echoing throughout the hazy harbor sends
a chill down our spines as Jamie Orr from Victoria, BC,
blows the pipes along the seawall. Jamie and his dad,
Les, come down every year. Jamie built a very nice Bolger
Chebacco (Wayward Lass) that he usually
brings and knocks around the harbor in. This year he brought
the cedar strip Rushton’s Sairy Gamp canoe he built for
his daughter. Jamie is the organizer of this summer’s
trip to Sucia Island, Washington. Check out his Web page,
https://www3.telus.net/wavefront/sucia/,
for more information.
Jamie Orr on the Pipes.{Lesh}
Jamie trying to wake up the author
in his Burro. {Lesh}
Some of
the Boats Displayed
Click on the thumbnails to see a larger image
(Photos by John Kohnen unless otherwise noted)
Jim Ballou of Milwaukie: It's a Dilly,
restored 1960 Dillabaugh skiff |
Bryan Beachy of Scio: Lizzie,
sailing peapod from fig. 84 in American Small Sailing
Craft |
Larry Beggs of Newport: Restored 1959 17' Thompson
|
Jack Brown of Depoe Bay: Mighty Mouse
Lives II, 19' Cape Ann dory built by Bill
Childs |
Jack Buehn of Otis: Restored 19' Century runabout |
Jim Cooper of Albany: Brianna,
Nutshell Pram with remote control electric motor
{Lesh} |
Jack Ehrlich & Jerry Kruger of Portland: Restored
1958 14' Reinell
|
Roger Fletcher of Dallas: 10' drift pram designed
and built with his grandson |
Brian Gage of Oregon City: Freedom,
18' Chamberlain/Gardner gunning dory |
Greg Gilham of Salem: The Tidewater,
restored 20' power dory |
Harvey Golden of Portland: Skin on frame Arctic
kayaks |
Harvey Golden preparing to do his Eskimo rolling
demonstration |
Bruce Heys of Corvallis: 16' Ian Oughtred Fulmar
daysailer |
Ray Heater & Cy Happy of Sandy: Tom Kaarhus
style McKenzie River drift boat |
This style of drift boat is also called a Rapid
Robert |
They were popular on the Siletz & Nestucca
Rivers in the '30s & '40s |
Mark Keeler: 1961 18' Thompson, being restored |
Killer Whales Rowing Club of Depoe Bay: Brenda
Sue, 14' Atkin skiff powered by a riding
lawnmower engine, built and donated by Jim Cooper
|
John Kohnen of Eugene: Pickle,
15' Footloose Skiff built by Louie Brochetti |
Jerry Kruger of Portland: Ziggy,
Penguin one-design sailboat |
Bob Larkin of Corvallis: 8' Acorn Tender |
Scott Malvitch of Newport: Banks dory built
the old-fashioned way |
Mike McKay of Albany: Whisper,
electric Six-Hour Canoe |
Mike McKay of Albany: Ken Swan designed skiff |
Dick Mitsch of Lebanon: Orca,
stretched Yankee Tender and Scruffy,
13' dory |
Dick Mitsch based Scruffy on two bows
of a Yankee Tender |
Paul Mosier of Lincoln City: Babe,
11' Shellback sailing dinghy |
Babe |
Jamie Orr of Victoria, BC: Strip-planked Rushton
Sairy Gamp canoe |
Jamie Orr tries out the Sairy Gamp |
Pat Patteson of Colton: 20' PK-20 outboard cruiser
of his own design |
Beanie Robison of Depoe Bay: Restored 19' George
Calkins designed Bartender |
Pogo Robison and Donn Santo of Depoe Bay: Restored
1938 16' Poulsbo boat |
The Poulsbo boat |
Pogo Robison of Depoe Bay: Restored 1956 14'
Century runabout |
Don Rutledge of Molalla: Ken Swan designed 16' Nez
Perce skiff |
Gary Sellers of Newport: 1962 17' Heurth Willamette
River fishing boat |
Sky Lakes Canoe & Paddle of Klamath Falls: Wood
and canvas canoes, 1917 Old Town canoe |
Miss QT, 11' runabout, a "shrunk"
Glen-L Squirt |
Miss QT |
Susan van Leuven of Battle Ground, Golden
Lady, strip-planked pulling boat |
Orca, a
26' Bartender of unknown ownership |
Author and his Toto. (Kohnen)
The Author and his Windance
(Moondance).{Kohnen} [I could have sold the Burro about
50 times]
John Kohnen aboard his Pickle.
{Lesh}
More boats, from foreground to background:
Pat Patteson’s Elegant Punt, Ray Heater’s Rapid Robert,
Golden Lady, Dick Mitsch’s Yankee Tender.{Lesh}
Almost all of the boats
in the show have been built or restored by the participants.
We have great times at the Festival sharing our ideas,
experiences, techniques, mistakes and discoveries. Meaningful
and rewarding friendships are formed, fostered and expanded
through our newsgroup.
The Depoe Bay show is always the last weekend in April.
For photos from Depoe Bay
festivals in the past visit John Kohnen's Depoe
Bay Wooden Boat Festival page.
{Lesh}
Authors Note: John
and I did good to get what we got here. Whew! Sorry
for any omissions, mistakes and screw ups. It is what
it is.
Terry Lesh
terrylesh33@yahoo.com
|