| 
      Fat GuysBuilding Boats
 | Amateur Hourby Kevin Walsh
 kevinwal@hotmail.com
 
 Better Living Through 
      Chemistry I'm a big fan of The History Channel (also known in my house as The 
      Hitler Channel) and during one unfortunate lull between documentaries 
      about World War II, a short program came on which undertook to describe 
      old barns, covered bridges and other types of structures that managed to 
      remain standing hundreds of years after they were built. The program 
      ascribed this architectural miracle to the use of mortise and tenon 
      construction techniques rather than the nail, and went on to blather 
      endlessly about mortises and tenons, but I had already stopped listening. 
      I already knew that mortise and tenon is simply the old fashioned name for 
      epoxy.
 The fact is that without epoxy, I simply would not be building a boat. The 
      reasons are legion. First, nails are dangerous. Like bullets, they are 
      designed specifically to puncture a variety of materials, with a 
      particularly nasty propensity for piercing my own flesh. It's well known 
      that the first nails were invented by Torquemada, noted Spanish Inquisitor 
      and amateur carpenter, a man who was consumed with the idea that every 
      tool should have multiple applications. His ambition was well realized 
      with the evil nail, puncture implement extraordinaire and excellent 
      distribution mechanism for the tetanus bacilli.
 
 "But wait, Kevin!" I hear you exclaim. "Are not screws equally facile 
      fasteners?" To which I must respond with an alternative inquiry, are not 
      screws but twisted nails? And are not nails sufficiently twisted 
      implements of torture all by themselves without adding sharp, gripping 
      ridges that prevent a relatively clean extraction from a puncture wound?
 
 Contrast this horror with epoxy. Aside from those unfortunates sensitized 
      to epoxy exposure, what is the worst thing that can happen to you when 
      working with this amazing substance? I suppose you could glue your hand to 
      your face or something similar, but only if you hold it good and steady 
      for six hours or so. Your muscles would cramp up well before the glue 
      cures, thus preventing a decent bond, so this is rather unlikely. No, 
      epoxy is safe and effective, and you must be an even bigger fool than I am 
      to get into any real mischief with it.
 
 Epoxy has none of the harmful vapors associated with such other common 
      word-worker staples as paint thinner. I became well acquainted with the 
      effects of paint thinner only recently when I painted the hull of my boat. 
      Intent as I was on applying a smooth finish, I couldn't fail to notice 
      when my dog began to utter short, derisive comments on my brush tipping 
      technique, after which he proceeded to melt into a white and brown pool at 
      my feet.
 
 Consider all of the wonderful uses to which epoxy can be safely put. The 
      enterprising dieter might glue the refrigerator door shut to prevent those 
      late night snacking episodes. Of course, given the availability of a hair 
      dryer and chisel, such an obstacle can surely be overcome, but the 
      calories expended chipping away the granite-like gobs would surely make up 
      for any bingeing afterward. To get that last burst of speed in the 
      swimming pool, glue your toes together for "flippers au natural." For 
      those minor emergencies around the house, epoxy can work wonders when 
      surgical sutures are in short supply. And the opportunities for practical 
      jokes abound, not the least of which is the venerable but ever 
      entertaining "huge glob of snot" trick. (Hint: husbands, make sure you've 
      already ordered those flowers!)
 
 So enamored am I with epoxy that I've applied it in huge, glopping gobs to 
      my small boat project; nails and screws be damned. All of the concerns I 
      once had about epoxy have fallen one by one, to the point that I have only 
      a single worry remaining, and I would appreciate any information readers 
      out there might have on the topic: does epoxy float?
 |