Chuck

I've been getting email for about a year from a very interesting fellow in Sweden who has built a boat for folks with a handicap, like himself.  Sort of a landing craft. I've seen photos of it with a small motor but he says it will have a sail very soon. He asked if you might be interested in presenting the project on Duckworks. It is well worth the effort and I may write it up if you don't. I don't think he has a scanner so the photos come through the mail. Very nice and interesting man. This is his "from" address:

        Dejan Petrovic´  dejan.petrovic@privat.utfors.se 

Give him a buzz if he hasn't already contacted you.

JIm  <michalak@apci.net>

Of course I replied that I would contact Mr. Petrovic and  I wasted no time in sending the following e-mail:

Dejan:

Jim Michalak tells me that you have built a boat for folks with a handicap, and might consider letting us feature it in Duckworks Magazine.  We would definitely like to have a chance to present this project.  Let me know if you are interested.

Chuck Leinweber

His reply was short and to the point:

Hi!
Yes, I´ll sign on Your boat. Ask Jim for the photos first. There will be new ones later with the "boat" under sails.
Dejan
Sweden

Below is Dejan's report with pictures.  :

Mum says that I always cried and never slept as a baby.  Except when I was tucked up in a pram. Boating was my life.

A muscular ilness finaly grounded me some years ago. I didn´t get in, out or about in any boat anymore. A hard time.

Little by little I began to plan a new type of boat. I dropped my ballast of " must" on boats, their shape, materials, building and tradition. I landed on a hull similar to the Brazil "Jangada". They been around 6 000 years now.   4.97 x 1.88 meter. .33 meter between bottom and deck. Deck, sides and internal strukture from 4.5 mm birch plywood. Bottom from 6 mm. Transom from 2 x 4.5. A simple tape and gluejob. Heavy glass on bottom and sides and light glass on deck. A "fence" around, a drawbridge in front and a sofa in the back. Sideboards a lá Michalak. Two short masts, a balanced lug (keeps the sheet forces down) main (6.29 sq meter) and a standing lug (keeps the rear area free) mizzen (2.07sq meter). Rudder with a folding blade. Steering in Faeroe Island and Norwedgian way. (On top of rudder a short stick out to the side. A long stick on the short. Steer by pull and push. Keeps the rear area free.)

Started to build in spring 1998 and launched on the 17:th of October. Two weeks before the first snow. So many wasted years.  Now I saw my daughter (7 at the time) handle a small ordinary row/motorboat and decided to build a sailing one to her 8th birthday. No boat has probably been ready on the right day. Not this one eighter, but in January we have 0,7 meter ice anyhow. The building procedure is very simple. The bent plywood is very very strong. I believe that a "two sheet in length"-boat also could be made from 4.5 mm birch plywood.
Chuck is kind to show some pic of the boats! If he allow their will be pic´s of boats under sail and a fulI report on how they  handle. ( Note: I am looking forward to it, Dejan )  I want to thank Chuck and hope to inspire You to build a boat. I could!
But I don´t know what to call the type of boat I built first.
Mail Chuck a suggestion!

Dejan Petrovic´
Sweden

Drawbridge and motor in place. No sideboards yet.